阳泉[本地]软管泵_路面抛丸机用心做好细节

更换泵管操作步骤：
将连接泵进出口的管道拆开，并将冷却液放出。将进出口管夹内六角螺栓（各四个）拧下。短接管及管卡取出。将进出口前接管螺栓旋出，将前接管、压环及密封圈取出。启动电机，使电机顺时针旋转，将软管拉出。启动电机，使电机逆时针旋转。将新软管一侧涂少量润滑脂（黄油），然后将涂有润滑脂的一侧向泵壳壁，从泵壳上方插入至泵壳中，直至软管到泵壳下方出口的合适位置，停电机。将密封圈套至软管下口泵接管内，将压环装入，拧紧前接管螺栓，装入管夹，拧紧管夹螺栓。启动电机，使电机逆时针旋转，用手或橡胶板堵住软管上方口，软管全自行进入泵中，通过泵侧面窗口观察，使软管贴到泵壳内壁，停电机，按固定的方式将软管安装好。填加冷却液，软管更换即告完成。

还有一种食品级橡胶软管泵，它的内衬的橡胶层需要达到了食品卫生的要求，同时也需要符合EHEDG或者其他卫生级的要求。还有三元乙丙橡胶软管泵，这种一般适用于绝大多数腐蚀性的化学物质和无机物，内衬橡胶层由三元乙丙橡胶构成，外层也是完整的三元乙丙橡胶。这样的软管具备很强的抗化学腐蚀的特性。以及CSM软管泵，它适用于特别腐蚀性的化学介质，如：强氧化溶剂。软管的内层是CSM，外层是天然橡胶。运行温度达到85℃/185°F。

There is also a food-grade rubber hose pump. Its rubber layer must meet food hygiene requirements, and it must also meet EHEDG or other sanitary requirements. There is also a EPDM hose pump, which is generally suitable for most corrosive chemicals and inorganic materials. The inner rubber layer is composed of EPDM rubber, and the outer layer is also a complete EPDM rubber. Such hoses have strong chemical resistance. And CSM hose pump, it is suitable for particularly corrosive chemical media, such as: strong oxidizing solvents. The inner layer of the hose is CSM and the outer layer is natural rubber. Operating temperature reaches 85 ° C / 185 ° F.